How to String a Badminton Racket by Hand | 11 Money-Saving Tips


The right racket for badminton which is appropriate for your ability, is crucial. It’s not just about the proper racquet size but also the string tension. Some rackets come unstrung. With continuous play, even the strings on an already strung racket could become loose or break. So, all players must know the proper way to stride a racquet for badminton. There are two methods. You can either thread the racquet with your hands or use an instrument for stringing. It is important to know how to string a badminton racket. This way, you will select the best method following the circumstances. However, stringing a tennis racquet needs some aspects to consider. Here we will discuss everything about how to string a badminton racket.

How to prepare badminton racket for stringing

Once you have decided to string badminton racket by hand, you’d like to and then begin to build the racket.

Get rid of the previous string: Therefore, you can utilize sharp knives to pull off the broken and frayed strings. To make it simpler, cut the lines in the middle before spreading them outwards.

Examine the Grommets: After you’ve removed the old strings, you can take an in-depth look at the grommets. Check for worn or damaged grommets. If a few need replacements, make sure they are repaired before stringing.

Review the Frame: In addition to the grommets, you should also look at the frame. Check the frame for evidence of broken joints or cracks. Stringing can put an enormous amount of tension on the racket’s frame. Do not begin stringing until there are broken or cracked areas. The best option is to repair the damaged areas or break the badminton racket before beginning.

Learn more: How to choose a badminton racket

Things to consider before stringing a badminton racket

Before you start to string a badminton racket, you must know the kind of string you want that you will need, the correct tension, as well as the string pattern you wish to employ. To do this, make a note of these:

String diameter

In terms of string diameter, you have two choices to choose from for your cords: thin and thick. The thicker cords last longer. They don’t require regular strings replacement. However, since they are heavy and heavy, they create an unattractive sound when they hit the shuttlecock. However, they offer exceptional performance. They can, for instance, allow for far-reaching shots. Additionally, the cords create a pleasant sound when the shuttle’s impact. But, their small diameter gives them a limited time. It means you’ll need to string your racquet more frequently than using thick strings.

String tension

It is important to know the string tension that the frame will support. If you increase the tension of the strings above the tension limit, the frame could be bent, cracks develop or even break. Certain frameworks can be able to withstand as tight as 30lbs. Additionally, decide on the appropriate racket string tension compatible with your ability level. For beginners, the string tension should be low between 20 and 25lbs is the best choice. This kind of range allows novice players to hit the racquet and more power. But, advanced and professional players can play with rackets with tension above 30lbs.

How to string a badminton racket by hand

If you’re a serious fan of badminton, then you already know that stringing your racket is a natural process. The strings will be enthralled at some point, especially when you’ve used the racket for an extended duration. This is why you’ll require a new ring, even if it was purchased as a pre-strung racket. Now we will explain 11 easy steps to string a badminton racket by hand.

Read more: How badminton string tension affects racket performance


String an end into the hole that is closest to the shaft. Then, straighten the string to fit through the hole on top of the frame.


Then, you pass the cord through the two holes on top. Then, you can drop the string until it reaches the lower part of the racquet at the point where you started stringing. But, make sure that the cord is inserted into holes on opposite sides of the shaft. At this point, you should have both of these cords on the opposite part of the shaft. Adjust the ropes to get equal distribution of springs on both the right and left-hand sides.


Pick up one side and start stringing upwards and downwards in the pattern while moving to the left. The initial string pattern at the center serves as your reference for the rest of the pattern to follow. String the cords until the point at which the head frame starts to curve.


There ought to be enough rope hanging at the end to tie knots. If the rope’s length seems not long enough, adjust the strands to achieve the proper length. When you have enough string length, tie the knot first and then another one on top of the original knot. The knot will stop your string from moving back into the hole.


After you have tied knots, adjust the tension of strings. Start with the longest thread with the knot, and move to the middle string.


Next, you need to tie the rest of the racquet in the same way. Once you have reached the point when the frame starts to curve, tie an identical knot as before. Before you tie an etiquette, make sure that the string’s tightness will align with the tension you want. If not, move the individual strands of rope from one end to another. After that, use pliers to ensure that the rope is tight when you tie the knot. To ensure the best results, make sure the knot is as near as you can as the opening.


From the base, add until 4 holes. Then, thread the string through and tie a knot within the frames.


After that, pass the string through it through the 7th hole. The ropes need to pass between the vertical strings when creating the horizontal string. Then, you can make the first horizontal string by passing it across and under the vertical strings until you are in the opposite hole to the beginning point. While doing this, you must ensure that the line stays straight.


If you started out with an over-under weave pattern, change it into an under-over. Alternate the pattern each time you start a new horizontal row and finish it. Continue to string until you reach the point where the head begins to curve.


Then, you can adjust each horizontal row so that there is no slack on the string. After you have passed it through the final hole, tie a large knot to ensure that the string doesn’t slide back. You can tie knots stacked on top of one another to form one big lump.


Cut off the hanging string with an abrasive knife. But, you should leave some room in the knot. If the cords seem loose, Pull each strand to increase general tension in the tennis ball.


Find an authorized stringer

Not everyone is keen on doing their own badminton stringing, and not everybody wants to have badminton stringing equipment. If you have a badminton instructor, you can have them perform your stringing or refer you to someone nearby who can do it. After you’ve identified an appropriate stringer, keep them in your mind. They will begin to get to know you, come to comprehend the nature of your game and the kind of tension you prefer. That brings us back to the tension of strings that we discussed at the beginning.

Discover the tension that you enjoy and stick to it

The right tension on your string will help you have the best game. The correct tension can help you manage your shots and also helps you maintain the power. If your tension may be too loose, either too loose or tight, you’ll not be able to play an unpredictable game, but you could be risking injuries. The tighter the tension is, the more your arm will have to perform. It is not a good idea to injure your wrists, muscles, or shoulders. You do not want to develop a tennis elbow.

It also happens to have to do with your badminton racket. Choose a racket appropriate for your body type A racket that is too heavy could cause injury to your body. A racket that is too heavy could result in you playing erratically. Remember that the lower string tension means you have more energy or repulsion. The tighter the tension, the lowers the repulsion and less power.

Contact badminton coach and fellow players

If you’re an experienced player, others are likely to talk to you and offer suggestions. If you’re an aspiring Badminton player, talk with your coach or at the sports store you frequent. They could take a look at your body and size, determine your ability to play, and recommend the racket type and the tension of the string. Once you’ve got a badminton racket is in place, it will last for many years, especially when you purchase a high-quality one. Restringing is something you must consider, as your coach or other players will offer suggestions.

Badminton sweet spot

There is a spot known as”the sweet spot in badminton.” You should try hitting this spot continuously. Making sure you hit the shuttlecock at the sweet spot requires practicing knowledge, judgment, and hand-eye coordination. Correct badminton racket as well as the proper tension of the string. Low string tension can give you a wide sweet place, but it has to be the proper low tension. High tension strings give greater shot precision. It is crucial to strike the right balance.


The Decision Time. Should you learn how to string a badminton racket by hand and make your own stringing, or buy equipment for stringing badminton? It all depends on you. But it’s always better than having somebody else strangle your racket. This is less stress-inducing, fast and easy. Additionally, you can trust that it will perform and there will be no mistakes. However, making your own stringing will mean you can achieve precisely the amount of tension you desire while also saving you cash. Look online at the different choices. Keep practicing and working to find the perfect spot!

Leave a Reply

Your email address will not be published. Required fields are marked *

13 − 12 =