How to Spool a Spinning Reel to Eliminate Line Twist – Info Guide

We’ve all cast to see our bait slow to a halt and then glance down to see a horrid bird’s nest forming from our reel spinning. Understanding how to spool the reel properly can greatly decrease the chance of creating a twist in the line that can cause bird’s nests. So how do we spin a reel to get rid of this issue? The proper method to string the spinning reel isn’t difficult. We’ll walk you through the process of how to spool a spinning reel to eliminate line twist using step-by-step steps to aid you in becoming more successful at fishing! This technique is useful to spool ultralight spinning reels to catch crappie, place fishing lines on spinning inshore reels for brackish water fishing, and fit fluorocarbon line onto spinning reels to catch bass.

How to spool a spinning reel to eliminate line twist

Step 1

The line should be placed on a smooth surface, where it will unravel counterclockwise. Ensuring the line can unwind counterclockwise is the most important aspect of eliminating line twists. This process allows the line to spin on the reel in a clockwise direction. However, it doesn’t cause the line to spin against its natural curvature, which it already is when placed on the manufacturer’s line spool.

Step 2

The line should be inserted into the eye on the bottom of the rod to help the reel draw the line onto the spool in the same way it would be like using your reel fishing. It is possible to run the line through all eyes of the fishing rod, but it can make it more troublesome and isn’t necessary to tie a fishing reel.

Step 3

I cannot tell you how often I’ve got caught up in a rush and have not opened the bail before knotting the line to the reel’s spool. Then I had to remove the knot or cut off the line, then retying the knot. The reel won’t work if the fishing line cannot pass under the bail.

Step 4

There will be a variety of answers dependent on the angler you inquire about which knot to secure the line onto the reel spool of a fishing reel. Some will suggest that a knot tied overhand is sufficient while others will suggest you an Arbor knot. After you’ve tied the knot for fishing you prefer, cut off the end tied to the fishing line. The excess line left at the tag’s back could cause problems later while fishing.

Step 5

This could be a little bit of an issue, depending on your line type. The braided fishing line is much more likely to turn around the reel and not get spooled onto the reel. It is possible to require the backing of a monofilament to stop your braided line from spinning into circles. I would suggest using a double knot to join the mono line to the braid. Ensure you create an unnatural resistance by pinning the line between your fingers while reeling. It’s not so hard that it can cut into your fingers, but enough to force the fishing line to connect to the reel safely.

Step 6

As opposed to bait casters, you can overload a spin reel using the line. Put enough fishing lines on the spool to have approximately 1/8th of an inch of space at the bottom. I attempted to put an additional line on a unidirectional reel! Unfortunately, it was not a pleasant fishing excursion dealing with the bird’s nest, which followed my initial casting. Therefore, I strongly recommend spooling the proper amount of line on your reel.

Step 7

If you’ve got enough but not too many fishing lines on your spool, cut the line. Then, run the line around the remaining eyes on the rod in case it hasn’t yet. Finally, put on your favorite lure, and take off to your favorite fishing location!

Step 8

Now that you’ve got your spinning reel stuffed with line and your preferred lure hooked, now is the time to think about your next trip to the fishing lake and go fishing! You can take pleasure in the results of your work and cast without worrying too much about a knot from fishing lines.

How to spool a spinning reel to eliminate line twist: Tips

Every angler should carry fingernail clippers to clip the fishing line after tying on new baits or making a new tie on lures. Additionally, they are handy when you want to shorten your fingernails as you wait for the next bite! Piscifun and Berkley both have specially-designed tools to make the spooling line onto a spinning reel a lot easier. This Piscifun EZ Fishing Line Spooler System is my top choice because it can spool spinning and baitcasting reels. It’s compact and small, making it easy to carry around on a boat or kayak. It can also be attached directly to your rod, meaning you don’t have to remove your reel from the rod to spool your fishing line.

The Berkley Portable Fishing Line Spooling Station is an excellent item to keep in your shop at home. It’s still portable but bigger than the larger Piscifun EZ Fishing Line Spooler Portable Spooling Station. It’s also most effective by removing the rod from the reel and then attaching it to the spooling tool before placing the line on the reel. This Piscifun Fishing Line Winder Spooling Station is like that of the Berkley portable Fishing Line Spooling Station. It operates best when you remove the rod from the reel and then attach your reel to the device. It can be used with baitcasting reels and spinning reels. If you don’t wish to invest in fancy spooling equipment, you can put a pencil or pen into the center of the spool. You can then have someone hold it while you pull it onto the spinning reel.

Learn more: How to restring a fishing reel

Conclusion

Following these steps, you’ll be able to spin the reel properly to avoid getting those irritating bird’s nests when fishing. This will allow you more fun fishing and less trying to sort out a tangled mess! If this article was helpful to you, please forward it to your friends and read another of our excellent content! Always enjoy your life and live a wonderful adventure!