How to Retile a Shower Floor: 7 Cheap Steps Will Change Your Bathroom


Does your bathroom look aged and unappealing? Are you looking to retile a shower floor? Look no further as we’ve put together a specific article that will guide you through the process of changing the look of your shower with ease. Even if you’ve previously never attempted this, following this tutorial will simplify the task. Bathrooms are often the most frequently used areas in the home. Particularly when you’re expecting guests or family members you haven’t seen in many years, and you want your bathroom to appear attractive and sparkling. A shower tile replacement can take away the broken and old tiles and give an entirely new appearance to your bathroom in general. We’ll show you how to retile a shower floor in a couple of days with easy steps. For more in-depth details on how to retile a shower floor, read the tips described below.

Why it is necessary to retile a shower floor

Sometimes it boils up to more just visual aesthetics when installing showers. There could be a greater reason to replace the tile every once. The reason for this is mildew and mold. Certain tiles such as ceramics may be especially susceptible to mildew and mold. The stains can begin to appear on the tile floor, which makes it appear aged, worn and rather ugly. There is no need for mold to grow within your home since it could lead to respiratory problems if ignored.

Click here to learn how to create falls in the bathroom

How to retile a shower floor

The first step is to retile a shower floor that was previously installed and look at the shower base and the water barrier. If they’re both in good working order, put in the new tiles and make sure you’ve used tile spacers. After that, add the final touches, and you’ve accomplished! This guide will walk you step-by-step through installing tiles in your shower. So, you can make the bathroom according to your preferences by incorporating your personal style and design to make your house your personal space.

Step 1

The first step is to remove the old tiles. If you have grout removal instruments or putty knives, you can remove the grout holding the current tiles. You could reuse the tiled ceramics if you would like after they’ve been cleaned, but don’t use them in your shower. Once you’ve taken off the grout, it’s time to break your ceramic tiles. This is accomplished by sliding the putty blade as wide as underneath the tile to give you a greater chance of breaking them loose. The majority of them will come up fairly quickly. If the tiles aren’t able to be smashed, A little more force is required. Be careful as ceramic tiles could break quite easily. Utilize a small hammer to break up the more durable tiles. After you’ve gotten the first tile in place and removed, the remainder should be easy to get rid of.

Step 2

After you’ve taken away all the old tile, Make sure you look over the flooring of the shower for any adhesive remnants. Any adhesive left behind is easily removed with a paint remover from a store and some elbow grease using scrub brushes. Before moving on to the following step, ensure that the floor underneath is level and free of tiles adhesives. A clean and smooth surface is crucial to ensure your new tiles’ effective installation and adhesion. Continue the installation process as frequently as needed to ensure that the flooring is clean and smooth.

Step 3

Once the adhesives have been completely removed, it’s time to examine the state that the water barrier is in position on the shower floor. It is composed of thin material and is what prevents water from getting soaked into the bottom of the floor. If the barrier seems perfect, it’s time to move to the following step. Suppose the water barrier appears damaged or broken. In that case, you’ll have to replace or repair this barrier before moving on to the next step of the procedure.

Step 4

If you purchase the thin-set mortar, be sure you mix it according to the manufacturer’s specifications. You shouldn’t alter this formula under any circumstance. After the mixture is fully mixed and incorporated, apply an even coat of the thin-set mortar on the floor that will be the place where the tile will be placed. The best guideline is to use the thin mortar only in an area where tiles can be put within 15 minutes. Thinset mortar is likely to be set before applying the tiles and will need to be removed before reapplying. Make sure you do not apply the thin-set mortar to all floorings in one sitting.

Step 5

Use an old comb to brush the mortar before laying the tiles. This is so that the tiles stand a better likelihood of sticking to thin-set mortar that is rough instead of flat. Also, we need to make sure that the tiles are adhered to most flatly and securely feasible. The initial row of tiles on the coarse mortar. Make sure you tap them gently into the mortar (remember that ceramic is susceptible to breakage and cracks) with the smallest hammer. It is possible to place the tiles on top of a flat board to ensure they’ve been properly placed and then press down in a single go to ensure they’re correctly seated in the adhesive.

Step 6

The objective is to lay the tiles as evenly as possible. This is accomplished by buying a tile spacer from your local hardware retailer. The best part is that they are fairly inexpensive to purchase, so don’t fret if you don’t have one in your toolkit. Install all of the tiles in the row and look for irregularities that might have occurred. Make any changes in the manner you like. Remember that we’re taking this row one at a time, as the thin-set mortar will dry before you can put the tiles in all of the floorings. This will only delay the process more time and use up certain materials.

Step 7

Be sure that the mortar is dry before applying the grout. Whatever grout you select, make sure you follow the manufacturer’s instructions correctly to avoid any issues or mishaps with the grout. Utilize a grouting trowel and apply the grout between the spaces between the tiles. Any leftover grout is best removed with a wet sponge. Once everything is removed and cleaned, the shower tile is properly set up and is set to be used.

How to Retile a Shower Floor: Tips

  • You must turn off any possible water source to prevent getting sprayed with water all over your body. When removing the grout between present tiles, you might prefer to utilize an electric grinder. This will make the task quicker and simpler.
  • Make sure you consider the safety of your family first. Wear safety glasses, long sleeves and gloves. As you begin to work, the pieces that have been broken off of tiles will be flying in every direction at different speeds. You aren’t likely to get injured.
  • Be aware that when you remove mortar from walls, it is best to remove it completely. The general rule is that the more you get rid of it, the more effectively the new mortar work. When you’re sure, the surface is clean, clean it off with water, removing any dust and dirt, leaving a clean surface.
  • When you are putting in new tiles, it is important to determine the height of the tile and draw chalk lines above the tile’s height. A mortar is required to be applied under the chalk line, which will assist in helping the mortar layer to ensure that the tiles are properly held.
  • Another thing to remember is that once the work is complete, applying a layer with a grout sealer is recommended. This will make sure that the grout stays well. If the grout doesn’t stay well, it may be eroded by water and cause damage to the work.

Read more: How to install a shower base on a concrete floor


It’s wonderful when you own your own place, and you can decorate it however you’d like to. Sometimes that’s re-tiled your shower. It’s a great option to incorporate your personal style and spink into the home. Follow the steps in this post to retile a shower floor. You will not be disappointed!

Leave a Reply

Your email address will not be published. Required fields are marked *

11 + fourteen =