You probably have a brand new pool cue tip. You just need to know how to replace a pool cue tip. Although it may sound complicated, it is actually quite simple. For the first time, it will take around 15 to 20 minutes. Make sure you have everything necessary to install a cue tip. Before I show you how to replace a tip, it is essential to understand when to replace it. While some tips have indicators, such as Tiger Everest’s, you will need to recognize warning signs to know when to replace the tip.
How to replace a cue tip
It is simple and easy to replace cue tips. It should take approximately 15 minutes to remove the old tip and place a new one with the right tools. This process will go faster if you practice more. It is essential to learn how to replace a tip in the pool without the assistance of a professional. A professional installation can cost you a few dollars. You can save that money by buying a better tip.
You must read: How to clean a snooker cue
To replace the cue tip, first, remove the original one. Use a razor or sharp knife to remove the old tip. Make sure you remove the ferrule and any glue residue. Take care when removing excess glue and the old cue tip. Please do not cut the ferrule, as this could make it more difficult for the news tip.
Use 60-80 grit sandpaper to lightly sand the ferrule’s top. This is done to ensure the tip can sit on a smooth surface. Tape around the ferrule if you need to mask any of it. Make sure that the ferrule’s top is in line with the tape. This is to protect it from glue globs.
You now have a smooth and clean ferrule top. It’s time to attach your new pool cue tip to your stick. I recommend using a cue tip that is the same size as or slightly larger than your pool cue shaft. Suppose your cue tip diameter is slightly greater than your shaft diameter. In that case, you can easily cut the tip to fit after the set glue. American pool cue tips can be purchased with a diameter of 13mm to 14mm.
Place the cue tip on the ferrule surface and ensure it is in the middle. For 5-10 minutes, keep the tip in contact with your fingers. Make sure the cue tip is securely attached to the ferrule. You can gently test the cue tip with your fingers to ensure it is secure. If there is movement, you can go back to step 1. Take off the masking and clean up any glue.
Congratulations! You now have a brand-new cue tip attached to your stick. It’s time to trim it to make it more closely fit the shaft. To make it easier to trim:
- Place the cue tip on the floor with the cue tip facing up.
- Use a razor blade to carefully remove the cue tip.
- Do not remove too much at one time.
You want the sides and ferrule of the cue tips to be flush. This is what you’d expect from a pool cue. Continue to remove the leather from the tip slowly. After you are done, use your low-grit sandpaper to ensure that the ferrule and cue tip meet. If possible, avoid sanding the ferrule.
Now that the trip has come together, it’s time to finish it. You might have an Amazon tip tool that can help you, or you can use the sandpaper to shape it to your liking. Common shapes for pool cue tips are the circumferences of a nickel or dime.
You are almost ready to begin shooting! Apply a small amount of water to your fingertips. Feel the tips of your fingers. This adds a little moisture to the sides. After you are done, use a piece of leather to burnish your tips. That’s all! Now you know how to change a tip on a pool cue, and you are ready to conquer the world with your fancy pool cue tip.
How to attach a slip-on tip to a pool cue
These slip-on pool cue tips can be installed quickly and cheaply. Although they may not be as durable as regular leather tips, they can be used on less expensive or house cues. Slip-on cue tips are great because there is no need to clamp or glue. You slide the slip-on tip over the ferrule. It is quick, simple, and easy.
Don’t miss: How to change the weight of a pool cue
What is the cost of replacing a pool cue tip
A pool cue tip replacement typically costs $5. The cost of replacing a pool cue tip will vary depending on its type and the materials. You don’t need a professional to replace your pool cue tip. Follow my guide here for free. The tip will cost the most, but the repair tool can save you a little. The cost of pool cue tips can range from just a few dollars up to more than $30. Don’t cut corners on a sound cue. There are many tips available, so you can find the one that suits your playing style and ball control. You now know how to replace a tip on a cue stick. There is no need for a professional.
How to replace a cue tip: Things to bear in mind
- To remove the tip, use a razor blade or sharp knife to cut as close as possible to the ferrule. Remove any glue or leather from your ferrule slowly and carefully.
- Use a flat top sander to remove glue and any dirt from the ferrule’s top. Make sure the ferrule has a flat surface.
- To make the tip rougher, sand it. To make it easier for the glue to stick to the tip, you want it to be rough.
- Press the tip hard to eliminate air pockets between the ferrule and tip. To remove any glue from the ferrule’s sides, wipe it with a dry cloth.
- Press the cue tip for approximately 10 minutes to allow the glue to dry.
- Any parts of the tip not in line with the ferrule should be removed. Place the cue stick flat on a surface and place the ferrule at the end.
- Now, the tip of the cue stick is on the ferrule. The tip is likely flat. To shape the tip however you like, sand it. To remove protruding areas, you can also sand down the tip from the sides.
A new tip can make a huge difference in your game. You should be able to recognize when a tip is required and take action. If you play a lot, it can be costly to have a professional install your cue tips. You should now know how to replace a pool tip. Complete pool stick tip replacement – Happy shooting!