How to Reduce Noise from a Tankless Water Heater – Amazing Guidelines


No matter what you have heard, tankless water heaters may be noisy. Although these noises do not necessarily indicate an issue within the unit, you must identify the source of the noise and resolve any issues that may be underlying. To lessen the sound of tanks-less water heaters, it’s usually necessary to flush it with vinegar. It also requires tightening loose parts and ensuring that the inlet outlets and inlet valves are completely open. It is possible to perform these maintenance tasks at home, eliminating the need to call an experienced plumber. This article will outline the steps necessary to reduce noise from a tankless water heater and then a discussion of solutions to other issues related to the units.

How to reduce noise from a tankless water heater

Follow our expert’s steps to reduce noise from a tankless water heater

Step 1

Examine the fan in your tankless heater to look for insects and Lizards. The most frequent reason for the unusually loud noises from the tankless water heater is insects in the fan. Insects (or tiny lizards) could make their way inside the tankless heater and become stuck in the blower fan. The critters can make the blower fan unbalanced, and this could create a rumble. To access the fans, you must disconnect the tankless heater first, then take off the cover. The fan’s blower will probably include a few screws that must be removed. After that, you can take it off. If you need to take out the wiring, we suggest taking a photograph of the wire with your phone before taking it off. The bottle of air can eliminate dirt and insects from the fans.

Step 2

Ensure the fan is inside the water heater tankless to ensure an appropriate balance. Even if the blower is free of insects or debris, it is uneven and makes loud sounds. Once you’ve removed the fan blower, turn the blades off the fan and check if the fan spins effortlessly and in a single direction. If it isn’t spinning properly, it could be time to get an upgrade to your fan.

Step 3

Examine the pressure relief valve on the tankless unit if you hear a ‘tea kettle sound. Some homeowners hear an eerie sound from the tanks of their water heaters when they shut off the water heater. The strange sound could result from a partially opened valve for pressure relief in a tankless gas unit. The sound comes due to the pressure release in the valve when you shut off the heating.

Step 4

Set up the tankless heater that has anti-vibration mounts that reduce the noise. Anti-vibration mounts consist of rubber or neoprene that aids in reducing noise. These mounts are usually equipped with a bracket that blocks the tankless heater to the wall, reducing vibrations. If you’re not keen to mount anti-vibration, you can put a rubber or foam mat between the heater and the wall.

Step 5

Install soundproofing materials on the water tank in front of it. Homeowners can put up 5/8″ drywall as well as Rockwool insulation. They can also apply acoustic caulking to minimize noise. Have a qualified plumber or tech alter the settings of tankless water heaters. When you’ve got a fire or fan that is not properly set, it could produce many noisy noises due to incorrect calibration. This task is best left to the experts since it requires an advanced understanding of tankless heater operation.

Step 6

Verify that no hot water leakage causes your tankless heater to continually switch on. If your heater is not cycling and constantly making noises, you might have a hot leak, causing your tankless heater to switch on. It’s like the case when someone is always turning on a hot water tap. The most effective way to determine whether there is an issue with hot water is to shut off the cold valve on your tankless heater.

Give it two minutes, then quickly switch on the valve for cold water. If water is flowing through the valve, you’re sure there’s a hot water leak. This procedure creates a closed-loop, and if there is no leak, water will not flow through the valve when it’s opened. Homeowners should also ensure that there aren’t drip leaks from any of the faucets in the home.

Step 7

Humming sounds are usually caused by the heating element being loose. If you hear humming, it is merely a matter of having to tighten on the element that is heating. Always disconnect the tankless water heater before tightening screws inside the unit. The flow sensor controls the quantity of gas delivered into the water heater tank-less when it is in its operation. If the sensor has become dirty, it could create fluctuations in the gas’s intensity, which can cause the sound of a loud squeak.

Step 8

Owners of homes should ensure that any other fixtures in the plumbing aren’t taking away water that causes noisy vibrations and sounds. If the water heater tankless isn’t utilized, yet it produces loud noises, It could be caused by water siphoning. The most efficient way to prevent siphoning from other fixtures is to put in an automatic check valve.

Step 9

If you hear a screeching or high-pitched sound coming from the tankless unit or close to it, it could be due to an open water valve. The valve could only be partially open, resulting in loud screeching noises. Check that the valves for water at the tankless water heater are completely open. The water hammer in the tankless heater may produce annoying, loud noises. The sound of a water hammer is caused when there is excessive pressure inside the water pipe, which causes vibrations. The vibrations cause bangs against the walls and studs and cause high-pitched sounds. The easiest solution for water hammers is to put in water hammer arrestors, which are essentially small pieces of pipe that permit the tension to be let go.

How to reduce noise from a tankless water heater: Tips

Sound of a ping sound

The sound of tanks-less heaters sounds very similar to a boiling kettle ready to explode or to release sometimes. There may be two reasons for the sounds. First, the sound is created when sediments, particularly mud, settle into the system and release bubbles. The deposition process is comprised of minerals, calcium, and rust which causes overheating and boiling of water. This noise is a second one that happens when the water is too hot. Because the sediment closes off the thermostat in the interior and blocks it from directly interfacing with the water, it cannot detect the precise temperature of the water. In the process, it causes the water to overheat.

To minimize or stop the sound, you should frequently flush your tankless water heater. You can eliminate the sediments by completely draining them, especially if you own an electronic tankless heater. If you own an electric tankless water heater, be sure to install the gas valve in the pilot mode so that the burners won’t auto-start when you flush or drain off the water heater.

The sound of rumbling

It is possible to hear a crackling sound because the water is boiling too hot or boiling at an extremely high and is likely to explode. But, hot water will likely rumble when it reaches its boiling point. The sound of water is due to the roiling boiling until a valve for pressure relief can shut off the steam. The boiling or overheating of the water in a tankless water heater may occur because a broken thermostat or control unit isn’t registering the correct temperature or is not forming around the heating elements. However, the gas-type tankless water heater emits a crackling sound because the flame is not evenly distributed or turning off and on, or the heating unit has poor combustion or a dirty mess within.

Sounds of squealing

The sound of tankless water heaters sounds similar to the sound produced by the pressure cooker or kettle that requires only a tiny opening. One reason for the noise is that there is a problem with the scaling of the tankless water heater, which can block the gas flow or other valves. Other causes of sound that squeaks are the vibrations that the gas flow causes through the pipes for heating, obstructions in the pipeline that forces gas through a narrower pipe or a deformation of the gas jets.

Beeping sound

You may hear the noise to alert you. It could be caused by cutting out your water heater, gas or water leakage, or an electrical problem.

The sound could be due to the water heating component heating up in the tankless water heater. However, the temperature sensor isn’t able to discern the actual temperatures in the water. Water.Set the thermostat to off and determine why the issue has occurred. If the problem is due to scaling, decaling the heater could assist. If it’s an electrical or leakage issue, get advice from a plumber or electrician.

Chirping sound

It is possible to hear this sound when the tankless water heater you have has leak detectors that alert that there is a leak within the system. In addition to the temperature sensor, tanks without water heaters may generate this sound to warn you if the system is overheated to notify you that you must lower the temperature. Try to block the sound by using fresh batteries for the tankless water heater.


Tankless water heaters can be an excellent investment in your residence. If you’re new to the concept or have just noticed any noises from your tankless water heater and are searching for solutions on how to reduce noise from a tankless water heater. In that scenario, then, the methods discussed above could prove beneficial. All you need to do is identify the cause or problem that is causing the sound coming from your tankless heater and implement these techniques in the right way. Sometimes, the sounds coming from your tankless water could be due to the water heating or temperature adjustments.

Leave a Reply

Your email address will not be published. Required fields are marked *

two × 3 =