How to Make a Fishing Lure | Advance Techniques for All Fishermen


While many crankbaits today are made of hard plastic, some of the original crankbaits were made of wood. Manufacturers still prefer to make wooden fishing lures. You can make your fishing lures and save money instead of buying expensive baits. First, however, you need to know how to make a fishing lure. You need to choose a design and trace it onto a piece of wood. Then, cut it out. You can also tint the lure with hooks to make it more attractive. Set your traps on the water, and get ready to chase your fish.

What is a fishing lure? 

Before you start making your fishing lures, it is essential to understand what a fishing lure is. This is a type of simulated bait used to lure fish into biting. Different movements, vibrations, intensities, and colours can grab the fish section, which will result in them being caught on the hook. Baits are usually used in conjunction with a Fishing Rod. These reels are often made from various materials, such as plastic, rubber, plastic, tinsel or plastic. So, are you ready to take on how to make your fishing lure?

Read more: How to make fishing spear

how to make a fishing lure

Different types of lures 

There are many options available. Different types of fishing lures. It can be not very clear to choose the right one. Your choice is mainly dependent on which one you choose. The fishing style, conditions and weather. We have listed below the four most common types.

Surface lures: This lure is popular because it can pull along the surface of the water.

Sinking lures: This lure sinks in the water. There are no complex and quick rules to catch fish, but you can target them closer to the bottom than entice them to the surface.

Soft Plastic Lures: Use soft plastic material to take the bait. It is often available in different colours. When it is drawn along the water, it looks like a fish mural prey, such as worms or squid.

Floating lures: This broad category includes different types of baits, which gives you more control over their movements. They let you see what they are doing. Other water conditions and the locations where they are located. Fish mostly hide in their shells.

Check out more: How to use shaky head worms like a pro

How to make a fishing lure

Start cutting and designing

Before you begin with the design, you need to choose the type of material, and here we will be opting for wood. Many anglers who create their lures primarily use pine or balsa. These softwoods are incredibly easy to work with and don’tuire any heavy-duty materials to cut and shape.Before start get a pencil. As a reference, you can look up graphic images online. It can be challenging to create a trap from scratch. Therefore, search online for lure templates. There are many types of baits.

Next, cut the wood into a rectangle shape. It should measure at least 7 inches in length and 4 inches wide. Draw a line around the lure to show the curves on the wooden block. Once you have your design, you can sharpen your knife and begin cutting through the drawings. It’sIt’ssible that you don’t have the exact product so focuses on the abstract.

Size your lure

The lure size you choose must match the fish you want to catch. Standard plugs and crankbait are usually less than 6 inches long. However, the thickness can vary. For larger fish like muskellunge, plugs can even be 10 inches in length. If you don’t have a template, it might be worth looking online for a sizing chart. This will give you a better understanding of the most popular baits. You will be able to choose from many sizes of lures. In addition, you can modify the size of your lures to suit your preferences and what you expect on the water.

Deep water fishing 

Diving baits commonly feature a lip that lets them sink when retrieved. Therefore, make sure to take more caution. However, carving the lip doesn’t do any additional work. A lip is more of a duckbill bent downward at the end of the lure. Therefore, these traps need to be both stronger and heavier and can be used in any water.

Plugs are solid and round attractions. Some plugs have an internal rattle that entices crankbait. Thin minnows can be long and narrow. To make it easier to retrieve them, they have a small diving lip at the anterior. Curved minnows have no lips. Instead, they have curved bodies and a spot at the front that is even. Deep sinking lures are often equipped with long lips, allowing them to sink even when not used. These lures are often shaped like minnows, but they are designed to catch deep-water fish.

Cut the pattern lines

While using a carving knife at this point, the saw makes for a quick option. Band and scroll saws are frequently used for cutting small and irregular shapes such as a lure. Plan to keep the bait bigger than you want to have the end-product according to your requirements. This is an important technique to leave a margin for error. You should leave an additional 1/8 inch (0.32 cm) of wood around your design. You will have plenty of room to correct any errors that may occur. Use a carving knife to sculpt the wood around your sketch gently. To avoid injury or accidental cuts, keep the blade away from your body.

Grab the drill 

Before you poke holes into the designed shape, remember to mark out those points on the wood. The fundamental holes are eyelet screws, ballast weight, and the rattle, and then carefully drill it. You may prefer using a micro drill to work on the thin and delicate piece of wood. While marking the pilot holes, be sure to scrutinize the template or reference point. It all depends on what type of lure you are making. Most traps have at least two hooks. One hook should be on the front and the other on the back. For a longer lure, you might consider drilling a third of the hole at the back to add a hook. Drill additional holes if you need to add weight to your lure. You can also add weight to the hole you have already made.

Try to do some artistry

As soon as you done with holes, you will want to prepare your artistic mind. It’sIt’se to add some colours and create your very own fish lure. Remember painting a bait vary significantly from painting a home item. The interest will use in water, so you don’t have the paint come off the temptation during your fishing trip. Prepare the lure for painting by applying a clear sealer. It is preferable to use an epoxy sealer, which will also use as a base coating.

Spread it evenly over the lure. It is easiest to coat the entire trap with the sealer, then hang it. Let it dry. This sealer is prepare the wood for painting. It will also protect the wood from water damage. To dip the lure, place a nail in one of the pilot holes. Then let it dry. You can also paint the lure by hand if you are unable or unwilling to dip it. It is best to let it dry completely before flipping the lure over again. The sealant layer you apply after painting the lure is different. To protect the coating from any damage, we recommend that you use both.

Use split rings to connect hooks 

Thread a triple hook onto every end of the split ring. Next, thread the split rings onto the hindmost and bottom screw eyes. You can utilize split-ting pliers to wrench open the split rings, securing them to the hooks and screws. Split rings, which are open coils, are often used for keyrings. For instance, your house keys work similarly. You can attach the hooks to your keys without using split rings. Open their eyelets and use a pair of pliers to do this.

To avoid puncturing your fingers, you need to be careful. These trebles can be utilized for crankbaits or plugs, but you also have the option of double hooks. They can slide on the screw eyes and do not require split rings. This correction will make it more likely that you have your custom-made fishing lure. This is a great way to get the bass, trout or other fish you want.

How to make homemade fly fishing lures 

It is possible to make your fly fishing lures, but it can be not easy. You can also make your fishing lures if you’re happy with what is available. This work is inspiring for fly fishers. A work surface is essential, as well as some tools. You will love making your fly fishing lures. First, you need to decide what type of fly lure to tie.

This is determine by the type of insect you choose to imitate. Next, clean up your work surface. Take out any tools that might be necessary. Make sure you have enough lighting to finish the intricate work on your lure. Next, use the vice for secure engagement and interlocking of the hook. The vice should hold the bend of your hook while you keep the shank of your hook out of the jaws. You will need to observe how you made the fly fishing lure before you make it. Allow hanging the bobbin when you resemble your homemade fly fishing lure.

Adjust the vice to your liking so that you can use your hands more for work. Turn your head toward the hook and tie the fly securely. Take these steps carefully. A fly’s body can be made from feathers, hairs or wool yarn. Wrapping the material correctly will make your lure seem more alive. Your fishing lures can be made to look different from the ones on the market. They will be the only ones. Learn more how to setup fishing pole.

how to make a fishing lure

How to make fishing lures long-lasting

Below I have discussed some essential tips, but they are indeed worth your consideration.

  • A great way to save time is to keep your tackle separate. You don’t have large boxes. Instead, choose a smaller modular size. It is easier to manage and use for most baits. This will reduce the mess.
  • It’sIt’sood idea to dry your gear first if you fish in extreme weather or rain. Dry the equipment with a paper towel and let it dry. You can choose boxes that have rust inhibitors.
  • We discourage you from putting wet baits in your dry tackle box. Instead, let the bait sit for a while in the open air before you put it back in your dry tackle box.
  • To throw your baits, you can purchase a cavity tackle container. Dry them and then return them to their original containers.

Check out: How to make a fishing rod

How to make wooden fishing lures


Fishing hobbyists and professionals alike need to learn how to manage their favourite activity within a budget. There have been many phases of innovation and development in fishing gear. Fishing can be a costly activity, as are clothing and fishing gear. Although many things can cut down on your costs, it is more likely to lure fishing. You now know how to make fishing lures if you have this article. So what are you waiting for? Get started today!

Leave a Reply

Your email address will not be published. Required fields are marked *

1 + ten =