How to Install a Ceiling Fan Where No Fixture Exists | Expert’s Info Guide

Share

Rooms provide shelter, and shelters contain everything you need to aid you in living a comfortable life. The ceiling fan is an essential feature be a part of a room. Whether the weather is cold or hot and chilly, a ceiling fan could be a vital part of circulating warm air in winter. This can provide you with warm and comfortable air in summer, making the absence of a fan can leave the room is in a state of chaos. But, due to the differences in the design of rooms, all rooms will have their preferences. Certain rooms are equipped with fanlights, but others don’t. This raises the question of what to do to install a ceiling fan where no fixture exists.

When installing a ceiling fan, you need to employ a skilled and licensed electrician to make the investment and ensure that you are comfortable for years in a proper manner. There are a variety of steps with this, but installation always requires the use of wiring. A professional electrician requires wire without fixtures. Here are the tips to install a ceiling fan where no fixture exists.

How to install a ceiling fan where no fixture exists

How To Install A Ceiling Fan Where No Fixture Exists

Choose the location

An ideal place to install ceiling fans is in the dead middle of the ceiling. However, it’s not the ideal location. It doesn’t matter if it’s an attic or another higher floor. Your ceiling constructs with the design of joists with parallel joints in the same place as your rock slabs. You’ll need to make holes into the sheetrock, which is why you should be cautious when cutting between the two. Because they’re a load-bearing component, these joists will provide you with the space to put to the brace for your ceiling, which will support the fans’ load.

The size of the hole you’ll need is contingent on the style of the specific brace and electrical box you choose to make use of. The majority of braces have an electrical box which means compatibility isn’t an issue. The ideal place to cut the hole in the middle of two joists. Marking the cut is also easy. Place an electric unit on the ceiling, and draw the cut with an eraser.

Read here to learn how to balance a ceiling fan without a balancing kit

Find the power source

A ceiling fan requires power to function. Therefore, you’ll have to locate the power source to which you can connect the fan. If your home has a wall switch, you’re in a great position. It is necessary to extend it from a one-gang switch box to a 2 – or three-gang box, depending on the type of fan switch you’d like to utilize.

Before working in or around live wires, you must be sure to turn off the circuit breaker and determine if it’s an amp of 20 or 15 amp breaker. It is not recommended to work with live wires or use them as a tool. To ensure that you do not touch live wires, examine the wires or outlet using an electrical voltage tester.

Turn off circuit electricity

To begin, switch off the main electrical supply for the circuit. This is the way to keep the electrician safe from being electrocuted, and the wiring for this switch becomes much easier to reach. The typical ceiling fan weighs between 20-50 pounds. It is essential to consider the area and decide if it is suitable for the 20-50 pounds of the ceiling fan. If it is not, the place could be dangerous for you. The place must equip with a joist that can hold the fan.

Electric box

When the above steps have been completed, the electrical box installation can begin. The fan position is joist-like so that the electric fan can easily be secured to the joint. If there are two support joists, you’ll need braces and saddles. The procedure of installing an electric box that has a saddle and brace includes the following steps:

Create a hole in the ceiling, just across the support beams. Then you can push it through the fan’s brace together with an electrical box. The brace should be responsible for the support of the joint. Place an arm on the brace and then connect the wire with it.

Switch wiring

Select the switch that controls the fan. Wiring begins from the switch to the fan on the ceiling. A fish tape is an excellent option for this kind of wiring. Following the directions of the manufacturer, you can place the ceiling fan in the desired location. After installing the fan, turn on the switch to check if the fan is operating well or not.

Run the wires

It doesn’t matter if you have access to your loft or another floor over your room. The process could be very simple or challenging. If you are lucky enough with an attic that is accessible, all you need to do is pull your wire away from the source of power to a fishing tape or some other DIY device and drag it through the hole you made in the sheetrock. In the worst-case scenario, if you have the floor over the room, you’ll have to drill several holes in the sheetrock and then drill a hole in each joint between the wall that will be switches and the place that the box will be to the fan. In this scenario, it’s better to seek advice from an expert.

One scenario that falls in between is when the floor is on top, but the ceiling joists are parallel to the wall where the switches are located, or you cannot access the attic. It is necessary to make two holes in the ceiling above the switches on both the ceiling sheetrock and the wall to run the cable first, up the wall, before extending it to the ceiling.

Keep in mind that the breaker you’re operating the fan for will be 15 amps or more, then you’ll require 14 gauge wires; however, for a 20 amp breaker, you’ll require twelve gauge cables.

Wiring a ceiling fan

Connecting a ceiling fan to the electrical circuit is difficult, but it’s easy to comprehend. The primary aspect of wiring a ceiling fan is to consider how you would like it to operate. This means that some like switches, while others have switches that are separate for lights and fans.

It is part of the current style, is double switch wiring for ceiling fans. It will be helpful by connecting all of the conductors in green. Then join the cable from your ceiling with the one on the input side of the remote receiver as well as the fan wire. Then, attach the black wire from the ceiling to the black wire located on the remote receiver’s input.

That’s how you connect a ceiling fan to two switches. To connect two fans using similar circuits, you have to join the neutral wires, the ground wires, and those hot wires in a parallel manner.

Read more: How to install ceiling fan with a red wire

How to install a ceiling fan where the light fixture exists

In the beginning, you have to determine the correct dimension for the fan. The larger the space, the more fans are in it. This is why ceiling fans are so heavy. However, installing an overhead fan in the area where a light fixture is present could be complicated. Therefore, you’ve got a problem, and we have the perfect solution to it.

An electric box that is connected to the ceiling fan isn’t essential. The fan can be connected to the outlet of your existing electrical outlet instead of putting it in the electrical device. You can also make a swag kit that can connect an existing ceiling fan. It is highly beneficial since installing an electrical box can be expensive. Ceiling fan installation’s typical price is around $75 to $150. However, most people pay $150-$350 for both the components of the ceiling and work. The replacement of the fan could cost between $180 and upwards of $1300. Therefore, a ceiling fan can cut down the expense.

You must measure the length of the cord from the point to the wall where you plan to connect the fan and then measure the distance between that wall and the ceiling where the fan is to be placed. You’ll then have to add these measurements and then add 10 percent. This is the length of the swag kit as well as the cord.

After that, put the mounting box onto the ceiling of the fan. Make sure the screws are in good shape or not. Install the hooks of the swag chain to the ceiling. The cord and swag chain are in a symmetrical arrangement. Do not plug the cord into the outlet.

How To Install A Ceiling Fan Where No Fixture Exists

How much does it cost to install a ceiling fan where no fixtures exist?

The installation of a ceiling fan could be relatively inexpensive If you’re adept at it. Let’s create a short estimate of the cost of the materials. We’ll assume that you already own a fan you purchased at a reasonable price. Therefore we can remove it from the calculation.  Braces of high-quality with electric boxes can find at a price of as low as $20 or up to $150. You will likely require around fifteen feet worth of wire. You could also need as much as 20 feet based on the size of the space you have. We recommend buying 25-foot bundles. They cost starting at around 25 dollars for 14 gauge wire and $35 for 12-gauge wire.

Wall boxes of high-quality start at $3 for a 2-gang model and $4 for a 3 gang. Control switches for fans, for the decent product with a 3-step fan and an on/off switch, costs start at about $20 and go up to $100 for WiFi-connected switches. When we take these figures, we find it is possible to install the fans yourself to run between $300 to $70; however, if you require an electrician to help install it, you’ll need to add $50-$70.

How To Install A Ceiling Fan Where No Fixture Exists

Conclusion

We hope that we’ve been able to guide you through setting up an electric ceiling fan when there is no fan fixture. It’s not a complicated procedure if you’ve got the proper equipment (even more effective if you’ve got the space for an attic above); however, care should be taken in working with electricity or the installation of a ceiling fan on your own or by yourself, so consult an expert if you’re not sure. Be sure to have an interest in the article ” are ceiling fans safe” to ensure you’ve taken all steps necessary to keep yourself and your family secure within the vicinity of that ceiling fan.

Leave a Reply

Your email address will not be published.

twenty − eleven =

x