How to Increase Water Pressure from Rain Barrel – Uncomplicated Tips


Are you thinking about how to increase water pressure from the rain barrel?

However, the decision to change the watering your garden, well, or city garden to rainwater isn’t only a smart move for financial reasons. It’s also more beneficial for the environment. Rainwater that is collected and reused will not go through the drains. If you are using a sprinkler system, you can leave it in place and use it as a backup system or get rid of it. The plumbing and mechanics of drip irrigation systems that incorporate rainwater tanks require a completely different setup. After the new system has been installed, turning on a faucet to its rain barrel is an issue instead of closing the tap or setting the timer to a sprinkler system. This article’s primary goal is to instruct and inform our readers on how to increase water pressure from rain barrel and other relevant topics covered in the articles.

How to increase water pressure from rain barrel

A rain barrel can utilize to capture rainwater and use it to water your yard or wash windows or other vehicles in the vicinity. In my case, the barrel is filled to 50%-90%. A 55-gallon food slurp requires a mesh with holes to let water flow through. However, it must keet free of insects. You can connect tubes on the back of the bib. To get the best water flow from the garden hose, it is necessary to find ways to increase water pressure from the rain barrel. Now we will share those tips.

How to Increase Water Pressure from Rain Barrel

Make sure you have an air pump

If you thought there was a quick and straightforward method to boost the water flow from your rain barrel, it’s not the case. There is nothing else you can do that will prove to be as efficient as pumps. Each other thing I’ll cover here will increase the pressure but will not provide the smooth flow you’ve come accustomed to from your hose or faucet. In the end, there’s no better way to increase the pressure of water than to install a water pump and take it off. However, this doesn’t mean that pumps aren’t accompanied by many challenges. For starters, they’re not cost-free, and many cost between $50 and $100 for each. Furthermore, you’ll need to solve logistical issues, like installing the pump and providing the power. Therefore your installation possibilities are likely to restrict.

More volume equals more pressure

If you’re looking to increase water pressure from a rain barrel without a pump, then a larger barrel is crucial. We all know from high school science class, the ocean’s most profound part of the ocean holds such a high pressure that it could smash a person. Although you’re unlikely to crush in the very bottom of your tank or barrel, the physics of the equation is valid. The more water you have and the higher the pressure is likely to experience. When pressure is something that you’re going to need, purchase a larger barrel.

However, there’s a trick to use that may help since the total amount of water in the tank isn’t the entirety of the factors that drive pressure, but instead how the water stacks up, or more specifically, how high the container is. For example, suppose most of keep your liquid in a narrow and wide tank, like an inflatable pool. In that case, there is no downward pressure to generate the flow that you require to force your rainwater away from the garden hose.

Create an elevated platform to support the rain barrel

The height of the barrel doesn’t have to be determined through the size of the barrel gravity could play a significant role too. It can deliver the required height needed to create pressure by putting the rain barrel onto an elevated platform. Any height you decide to increase will boost the pressure build-up inside the hose.

It can only provide the maximum amount of pressure; however, you’ll need an enormous amount of elevation to generate enough energy from a single platform. For instance, the power of a typical home can achiev with about 30 feet elevation. If you don’t want to build a water tower within your backyard, you’ll likely have to settle for a little less. It’s essential when deciding between a platform or pump to know the cost. While pumps can appear more expensive in their initial value, a platform can cost more based on constructing it. Its cost can easily and quickly increase to be the same amount as the cost of a pump, if not more (especially if you decide to build a Water tower).

The hose is crucial than you believe

It’s normal to assume that a hose is smaller but helps you increase water pressure from the rain barrel. For instance, if we apply your thumb to the end of the hose, you’ll get a greater distance. To a certain extent, it is true, but it doesn’t mean the hose with a smaller diameter can result in higher pressure. With no pressure, the water will make it to the bottom of the hose, and the pressure depend on where you get the water, that is, your rain barrels.

It doesn’t mean that the size of your hose does not need to considere, though. When you select a hose, although pressure is less than the flow rate, it is crucial. The flow rate differs from water pressure since pressure is how water flows through the hose. However, the flow rate is the amount of water that can transport and is heavily dependent on the size of the hose.

Distances to move

Another aspect you should consider is the distance you require the drinking water to move. The pressure in your barrel can get at the fixture, but the farther you are from where you want the water to go, the lower pressure is at the end. This is especially important for those who use rainwater that they collect for irrigation because you might need the water to travel a considerable distance. For example, suppose you’re currently planning for an irrigation system. In that case, you might think about the distance that you’ll need the water to travel and look into ways to decrease the distance.

How to use a rain barrel

Redirecting water into the rainbarrel

The first thing you need to decide is the best method to channel the rainwater to your barrel. Specific methods are achievable using a hacksaw or another cutting instrument. In contrast, some require the use of power tools as well as meticulous planning.

No-Gutter options

If you don’t have gutters, you could still channel rainwater into the barrel. One way is to position your barrel in the drip line. However, this can be very inefficient. Nevertheless, this is the best option if two parts of your roof meet to funnel the runoff downwards into one stream. Another option is to utilize rain chains or strings that hang from the roofline and then into your barrel, allowing water to stay on its surface while gravity pulls it down.

Rainbarrel location and types

Another essential thing to think about is the location you’ll put your rain barrel. You’ll probably need to position it near or directly beneath a downspout. However, you must also think about the proximity to the plants that you’ll be watering. The kind of barrel you select is entirely your choice. There are methods to recycle old containers into rain barrels that you can make yourself. Alternatively, manufactured rain barrels find in various styles and can be matched to various aesthetics.

Suppose you want to reuse an old container to make rain barrels. In that case, it is possible to use old trash bins and recycling bins, cans, plastic containers, wooden and metal barrels, and any other item that could be used to hold water efficiently. Suppose you like the look of a polished manufactured rain barrel. In that case, many options are available either online or at a local garden and home centre.

Using your captured rainwater

Your rain barrel could be utilized for a myriad of things, and specific uses are than others. There are different ways of taking your water. Suppose you intend to use the water to water specific plants. In that case, scooping it out using a watering container or bucket could be a great option. If you plan to use the water primarily for one particular area or a lawn with a hose, a soaker hose is the best option.

The attachment of a hose is accomplished in a variety of ways. If you don’t possess a factory-made rain barrel with a pre-made connection, you could install it yourself. The most effective option is to put a spigot or hose connection about four inches higher than the base of the barrel. The installation of a hose or spigot requires additional tools, such as the drill that has a hole-saw tool and a threaded pipe connection to connect a spigot or the hose and the use of a rubber gasket or else to connect the threaded part with the barrel.

In terms of how you utilize the water, it’s entirely up to you! Your lawn might require irrigation during times of drought as the grass isn’t getting the one-inch water it requires every week. Watering your trees and shrubs is another option as they are often less water overall. Other plants in your backyard or garden are also a good idea. However, we advise against watering on the leafy greens you intend to eat, as they are prone to absorb pollutants.

Lifting for water pressure

If you’re interested in an insulated barrel that can be connected to a spigot or hose and you want to raise your barrel to allow gravity to create pressure. About 2 feet of height equals one pound of water pressure. And getting at least 4-6 inches of height of the barrel will aid. Ensuring the barrel is set on an appropriate base is crucial since a complete rain barrel could weigh up to hundreds of pounds. Bricks, cinder blocks, or 4’x4’s can be used.


A rain barrel will allow you to collect rainfall to water the gardens or wash windows and vehicles. A 55-gallon food-grade rain barrel features a perforated screen top that lets in water but blocks insects. We are sure you will enjoy going through the context of this article’s discussion regarding how to increase water pressure from rain barrels and other related sub-topics covered in the article.

Leave a Reply

Your email address will not be published. Required fields are marked *

five × three =