How to Hold a Fishing Rod | Pro Tips for All Intermediate Fishermen’s


Do you want to master fishing? The success rate of your fishing would depend on how to hold a fishing rod. This would have a more significant impact on your casting ability than you might expect. Your presentation could be affected by a slight or straightforward adjustment in how you hold the fishing rod. We won’t allow it to happen. We have compiled a list of practical ways to keep a fishing rod. Continue reading if you are curious to learn more.

Different parts of fishing rods

Butt cap 

It can be found at the rod’s end or over-the-top fishing rods. It can be found at the handle’s bottom or in the middle of the reel between the rod’s back and the rod’s rear end. Butt caps are generally made of rubber, wood, or aluminum.


This is where you have to hold the rod. This area usually fills with foam or cork and you can cut them in different lengths. When buying a handle, the size would be a significant consideration.

Reel seat 

The reel seat attaches only to hold the fishing rod close to the handle of the fishing rod. You will find a lot of options for attaching the revolution to the machine. Some fishing rods have rings over the reel feet, while others have a hood mechanism that screws up or down to the reel foot.


If the fishing rod breaks into more than one piece, it is the part that holds them together.

Different types of fishing rod

Spinning rods 

The spinning rods possess the eyelet guides that run along the rod’s bottom, hanging the reel below the handle grip. It has a straight handle and no finger hook. The line guides are a considerable length and then become smaller near the tip. Spinning rods use for fishing in freshwater, but you can also use them for saltwater fishing. If you don’t have a fishing rod you can also custom-made a fishing rod. To know details about how to make a fishing rod click here.

Fly fishing rods 

These rods can be considered one of the most difficult for fishing. These rods are made from both bamboo and artificial materials and are flexible, long, and thin. Fly rods are usually made up of large diameter eyes spaced along their bodies to control the movement of thicker fly lines.

Casting rods 

Casting rods have a handle that is slightly tipped and a finger hook at the extremity. This finger hook will wrap the index finger when casting. The rod’s top would be fitted with a spin-cast reel. It would help if you remembered that spin-cast rod and spin-cast reel would not work together.

Learn more: How to tie a fishing hook

Bait cast rods 

Baitcasting reels have the eyelet guides running along the rod’s top. The revolution would then be set on the handle grip. These rods can be equipped with either a straight or pistol grip. Baitcasting rods have a stiffer construction than other types of fishing rods. They are made from fiberglass or graphite, with foam or cork handles.

Saltwater or surf rods 

The most extended fishing rods are saltwater rods or surf rods. These rods are pretty heavy and also have a complicated construction. These rods are so long and you can use them to cast tackle and bait.

How to hold a fishing rod

Find out if your right-handed or left-handed hands 

First, determine if your hand is right- or left-handed. This is an essential detail that many people overlook. You don’t have to write with your right hand to be an angler. You must try both setups to find the most comfortable one. People assume their usual handedness corresponds with their fishing rod. It is often not true.

Use an enjoyable grip

Once you understand what type of setup you need, it is essential to find a comfortable grip. This secret translates into every kind of fishing rod. You cannot be productive if you don’t have a comfortable grip. It is crucial to determine how many fingers you need in front and behind the reel that connects to the rod. You should have at least one finger in front of the connection. You will be unstable if you don’t have that. The stronger your hold on the rod and fish will be, the more fingers you have in front of the reel connector. You need to be able to comfortably secure your baitcasting setup while still being able to cast effectively. Although this is not an easy process, it can help you become a better angler.

Wrap your fingers around 

To catch your catch efficiently and effectively, holding a fishing rod in a straight line is essential. First, you would need to wrap your fingers around the rod’s handle using thumb swathing and the other fingers. The rod would extend out from the extremity, and the top would be in your palm. Also, read how to tie two fishing lines together

Place the bottom palm around the rod 

After the first step, you may be able to hold the rod in your hands. However, you can also place your bottom palm on top of the rod by following this step. Then, you will need to wrap your middle finger around the rod’s tip.

For guidance, use your off-hand 

Once you’ve established a comfortable hand position, you can use your lead hand to guide the line through the reel. This tip is mainly for bait casters, but for all types of fishing, people use it. To control the casting and sequence of a bait caster, position the rod in the hand. Bait casters come with an open bail. This means that the hand that you crank must be on the bail connection and rod. This will allow you to control both the bail and rod simultaneously. You can return to your normal hand position after the bait has hit the water. This little trick will allow you to be a more effective angler and make the most out of your time on the water.

Positioning your forefinger 

To gain a proper grip, position your forefinger perfectly. You would rest your forefinger on the rod’s top side. The thumb will then fold into the side.

The ultimate grip 

The thumb and forefinger should line up to form a V shape at the end. This will give you a firm grip on your fishing rod. This would allow you to fish in a relaxed and happy mood.

Find the rod’s natural balance 

Learning how to hold a fishing rod is easier if you know a natural balance. Every fishing rod has a weight, and there is a point at which the rod balances completely. Each rod will typically be heavier towards the handle and lighter toward the tip. The balancing point is located a few inches below the handle’s end. Because the handle’s weight is unevenly distributed, this balancing point will not be in the middle. Understanding the physical dynamics of the rod will help you understand the science behind its use. This will help you to develop your holding technique. You hold it very balanced in your hands. If it is not, it will be more difficult to cast and reel in fish.

Govern your bail responsibly 

This secret is only for spinning setups. You may be familiar with the casting process. To let the line fly, open the bail. Then it clicks back shut. This is a simple trick that will help keep your gear fresher and lasts longer. It is better to close the bail with your reeling hand manually than to let the reel do it for you. It is simple to do this by simply letting go of your reel handle and flipping the bail closed. This will reduce the reel’s impact and increase its lifespan. Although it may alter how you hold the rod, it will not affect its time to flip it. After that, your hand can return to the reel handle.

Use your elbow 

Casting is a skill that many people forget. It will help if you use your elbow to your advantage. This is especially true for a spinning setup. Place the bottom end of the rod against your elbow after casting. Once your bait is in water, this will give you more control and stability. It is easy to forget about the proper technique of fishing. Although this is an easy trick, it isn’t something that many people consider. To reinforce the rod’s back end, place the rod against the elbow of your lead elbow. This will make it easy to see the difference in your results.

Set the appropriate drag 

This is an important point, even though it doesn’t seem directly related to casting and holding a rod. This will impact the way that you cast and reel in your line. In some cases, it can also impact how you have your rod. The drag must be a little looser when using spinning lines. This will prevent the line from snapping. This will affect the way the rod you hold ni hand. Without the correct drag set, you can’t just crank back and apply tons of pressure. Bait casters will typically reduce drag when fishing for small fish or braid. This allows you to apply a lot more pressure without worrying about the setup breaking. Whatever type of reel you use, the drag setting will affect how you hold the rod and use it.


The information above was our guideline on how to hold a fishing rod. We emphasize the importance of a fishing rod and the many types that are on the market. The fishing rod is the essential thing of your tackle. Choosing the right style and keeping it in order will ensure a high success rate of fishing. This list of ways to hold a fishing rod will hopefully help you to maintain your rod correctly. If you have any suggestions and want to share them with us, please leave them in the comments.

Leave a Reply

Your email address will not be published. Required fields are marked *

five × four =