How to Get More Power from a Briggs and Stratton Engine: Info Guide


Utilizing a machine stuck from time to time is a real pain. Lawnmowers with lower power could be stuck in thick grass due to the lower power. What can you do to get more power from a briggs and stratton engine? Making the machine more to your preferences can result in some extra horsepower. First, remove the flywheel’s housing. Then, you can take out the governor flap. It ensures that the carburetor can move free. After that, make sure the muffler is in good shape. You should ensure that air flows smoothly throughout the intake. These all help the engine generate some additional horsepower. However, there are other details for each step. Take a look at the entire procedure below!

How to get more power from a Briggs and Stratton engine

We all want a robust and powerful lawnmower. However, giant lawnmowers can be expensive at times. Some can are priced at thousands of dollars.
The procedure of increasing horsepower differs for each lawnmower. Additionally, features like switching off security switches on John Deere lawn mowers will vary in Briggs and Stratton. A more powerful engine can cut grass more efficiently and more quickly. Although there is no simple way to increase the power of the performance of your lawnmowers. It will not achieve a significant increase in horsepower. However, tuning your engine can help you in a small way. We have listed all of the steps you must adhere to below.

Step 1

Access is required inside the engine to perform work on it. The machine is located inside the flywheel’s housing. There are bolts and screws which hold the housing. Take off the bolts and screws using the correct wrench to gain access. The bolts and screws should be on the sides and top.

Step 2

The governor flap can be found beneath the flywheel’s housing. The governor flap is a barrier to letting the engine run at full speed. Therefore, removing it gives an engine more horsepower. Making use of the correct wrench is crucial. This will ensure that the bolts won’t break out while you tighten them. The twists listed below are of superior quality. In addition, the wrenches are highly durable and have an excellent grip.

They’re simple to hold to. The flap shuts the carburetor when the engine has too much throttle. The result is a decrease in its speed. It also causes less energy. Governor flaps are connected to the engine using screws and bolts. It is then removed using the correct wrench to remove it. Then, you can take the spring hook from the governor and connect it to the carburetor. The lawn mower can remove the monkey grass. After you have finished closing the flap for governor, it is time to place the flywheel housing in.

Step 3

The muffler is a crucial component that supplies an engine with power. The muffler transports the exhaust gas from your machine and then sends it to the outside. This allows the engine to take more oxygen and generate more power. The muffler must be sealed with an exhaust pipe. This is to ensure there isn’t any leakage in the process. Examine if there’s a crack or the seal is damaged. The gasket connects the muffler in place to the block of the engine. Make sure the gasket is secure. The muffler should be connected to the block of the engine. Additionally, there ought to be a gasket between the muffler and engine. Verify that the gasket is installed correctly.

If the muffler shows broken or cracked signs, you must replace it. However, the best part is that they aren’t expensive. In addition, the process of installation is relatively easy. Finding a brand new muffler to fit your mower at the retailer or online is possible. Be sure to purchase the proper size of the muffler. Various kinds of dampers are suitable for multiple engines. A different type could produce more noise. The process of installing a new muffler can be simple. Take off the bolts holding the muffler. Then, put the new damper in place and screw it in place.

Step 4

The higher the grade of gas you are using, the higher the performance is. Most people prefer 85 octanes since it’s more affordable. However, 92 octane has a better burn and more power. Additionally, using a high-quality spark plug will give you more extended longevity of the engine. Spark plugs are the parts that interact with the fuel and make the engine run. Examine the ignition coil using an instrument to determine whether the spark plug works in good condition. Do not mix the two fuels. It could damage your engine for a long time. It is recommended to use higher quality gasoline when you need additional power. Also, you can use the less expensive gas when you do not.

Step 5

Engines need oxygen like you do. Oxygen is compressed using gas, and the bursts create energy. The more airflow, the better performance. Wash the air filter or air intake to increase your engine’s airflow. The air filter is often clogged with dust, which blocks air from moving through. The replacement of the air filter every often is a wise choice. In addition to air filters, you should clean the air intake in case there’s any grass on the outside. Anything that hinders air from entering can slow down the airflow. Also, the more circulation of the air, the more excellent performance. Clean your air filter each month, and change it with a new air filter after two or three months. You can do everything to boost the airflow in your lawnmower’s engine.

How to get more power from a briggs and stratton engine: Tips

  • The pulley system used on lawn mowers could be adjusted to your specific needs by adding several different components. Lawn mower belts can include belt systems.
  • In the mower engine, the regulator controls the direction of the flow of fuel
  • This is an air filter. It cleanses the air
  • It’s the engine oil that allows you to manage your engine
  • The most essential elements of a small engine are air, fuel, spark
  • · The benefit of adding more air and fuel into an engine is that it creates more power and torque
  • The flywheel’s housing has to be taken off the motor
  • Remove the governor flap from the flywheel using the appropriate wrench size and loosen the bolt that holds it
  • Make sure that the mufflers are clear
  • The mower you are using requires high octane gas to function correctly
  • Be sure you are at the highest

How to speed up lawn mower engine

A maintenance issue can develop when a mower is turning slowly or even when it is just beginning to turn. It may be a defective spark plug, a faulty air filter, or a worn-out carburetor, but there is a possibility that gasoline may be the cause. Additionally, the cleanliness of the blade could be poor, leading to a slow start. It is recommended to raise the pulleys’ size to boost the speed you can utilize on your lawn mower. A governor for the engine controls an upper limit on pace so that the gas used to cut remains within the specified distance. A larger engine would be better to be a lawn mower? Lawn mowers ride the same as lawnmower engines with interchangeable bolt patterns, even if they’re not the lawnmower engines. Blades can be rotated on your mower by steering it using a pulley system.


All you have to know about how you can gain more power from the Briggs and Stratton engine. The bottom line is that having a higher-quality lawn mower will be more efficient. However, tuning your engine can provide you with an additional performance boost.
Happy lawn Mowing!

Leave a Reply

Your email address will not be published. Required fields are marked *

4 − 1 =