How to Clean an Air Hockey Table | Pro Money Saving Methods for Novice
This guide on how to clean an air hockey table will provide ways to keep the table free of dirt and obstructions to give you the best game experience. We’ll also discuss essential maintenance and how so that your table looks brand new. If you’ve decided to go for it and buy an air hockey table to play with your children, then you’ve spent quite a bit of money, and you’d like to ensure the table lasts more time. You needn’t spend an enormous amount of time thoroughly cleaning your table frequently. Instead, concentrate on keeping the playing area free of dirt, gunk, and dirt. Even for the playing surface of an Air hockey table, an unclean playing surface could hurt the experience you have. Cleansing must perform every two months or based on the frequency at which the table utilizes.
When to clean an air hockey table
Why should you clean an air hockey table? One of the primary reasons is that dirty tables could severely hinder play. A dirty surface can hinder the ball’s movement and can make it hard to hit certain shots. If a lot of dust or dirt accumulates on the surface, it can block holes in the table, creating what’s known as “dead spots. In these dead spots, the air isn’t capable of moving through the grime and dirt. That means that if you shoot your puck through one of these areas, the puck could be stopped in its tracks or considerably slow down, damaging a shot.
If there’s dirt or another kind of substance present on the surface, it could result in the puck being forced to leap or buck in the wrong direction. This could be very annoying for the players. In addition, it can result in damaging the table’s surface, which can result in chips and nicks. If this happens, even a regular deep cleaning won’t be enough to improve the gameplay.
To avoid this problem, the playing surface should be cleaned before and after each use. Regular maintenance should be performed every week. If you utilize the table once a month, it is recommended to do a thorough cleaning before putting it on the cover. Then, it would help if you did another deep clean once you have taken the table from storage. Typical deep cleaning require every few months.
It’s important to know about air hockey table dimensions.
How to clean an air hockey table
If you’ve read this article, most likely, you own an air hockey table of your own. But, many table players aren’t aware of the cost consequences of not maintaining their tables properly. If you are aware of your air hockey table then continue reading how to clean an air hockey table.
Switching on the blowers
Before you begin cleaning your table, make sure to turn to the air blower. This will prevent any dirt or grime from getting into the holes on the surface of your table. Be sure to go over the table with a gentle touch to prevent damaging the table’s surface using this nozzle.
Vacuum the table
Fortunately, you don’t require any special equipment to keep your table clean. Start by turning on the air hockey table and then grabbing your vacuum. Keep the table running during the cleaning will push dirt and dust through the holes. Then, run the vacuum cleaner’s hose across the entire playing area of the table. Make sure that you don’t let the hose get in contact with or drag across the table since it could scratch the table. The process shouldn’t last less than a couple of minutes.
Wipe down the playing surface
Once the table is clean and clean, you can use a soft, clean cloth to clean the table’s surface. We recommend using a gentle cloth made of cotton or microfiber cloth. It also recommends using the same cloth to clean off the sides of the table. Some players on hockey tables would advise you not to do this procedure since they believe that a tiny amount of dust could aid in making the bank shot. It’s essentially the decision of each player. It recommends cleaning the tables’ sides because the dust may track to the table’s surface, possibly blocking the holes in the table’s surface.
Clogged holes
One of the biggest problems that can affect your experience playing in the presence of blocked holes in the table’s surface. It’s an easy fix. However, when your table hasn’t clean in the past, it can quite a lengthy procedure. If your table has a lot of blocked holes in its playing surface, you’ll need to conduct a thorough clean. The majority of deep cleanings require finishing the table after washing off the table’s playing table’s surface, the sides of the table, as well as the legs.
It can also involve taking out the holes that are on the table. It is good to know that getting rid of the holes is a simple fix; however, this process can take a long time if the table is filthy. To do this, you’ll have to carefully use a toothpick to go through all of the blocked holes. Another option is using the drill bit. Make sure you maintain the blowers on to aid in dislodging the holes and eliminate the gunk from the table. On the table.
Use cleaning products
A few air hockey table owners are completely against using any chemical to wash their tables. They will use only a damp cloth, and others prefer cleaners that are alcohol-based or other ordinary furniture polishes. Window cleaners that don’t contain ammonia and dish soap like Dawn. Whatever detergent you decide to use, be sure that you dry your table thoroughly after you’ve cleaned it of all dirt and dust. Also, make sure you don’t cover the table’s surface with any chemicals. The residue can catch in the holes in the table and create a sticky, gunky surface blocking the holes and limiting playing. Due to this, we recommend immersing an oiled microfiber cloth into warm water and then rubbing it across the table’s surface after you’ve cleansed. This will wash away any leftover dishes or cleansers.
In this process, it is crucial to care about the pressure used to wash the surface. It is also essential to be sure to remove any gunk that may be on the surface. This could necessitate more pressure. To avoid scratches, it is also essential not to employ an abrasive cleaning agent on the table’s surface.
Waxing your air hockey table
Although it’s not required for air hockey tables, many owners like to polish the table’s surface after a thorough clean. However, while it’s not required, it is a great way to keep an even surface and make an old table appear new. The goal of sprucing up the table’s surface is twofold. Firstly, it smooths an old-fashioned or rough table and shields the table’s surface against any future damage.
If you choose to wax your playing area, be sure to use only a tiny amount of wax. Please don’t overdo it. Choose a specific type of wax for tables that play air hockey and apply a thin, even coat covering every inch of the surface. A thin layer of wax will make a huge difference in smoothing the table’s surface; however, when you mistake over-applying too much wax, you may end up clogging some air holes, resulting in dead spots.
After applying your thin coating of wax after drying, remove the wax from the surface of the table with an unclean, dry cloth to smooth out the wax. This will result in a shiny, smooth shiny surface.
Cutting down on cleanup
If you’re not able to clean your table before and after playing or lessen the amount of dust and dirt that accumulates in the table’s surfaces and table, Air hockey cover for your table is an ideal solution. The cover will keep the playing surface free of dust and tidy until you’re ready to play again. It also helps keep the table in good condition. In addition, ensure that you wash the pucks and strikers whenever you’re taking care of the table. You’ll be shocked by the amount of grime and gunk both strikers and pucks are likely to accumulate in time. One of the last things you’d like to do is introduce dirty strikers and pucks onto an unpolished table. The pads of the felt on certain strikers may attract dirt and wear out as time passes. If the pieces become dirty, it’s time to replace the pads.
Sand the pucks and mallets
If the game seems to be a bit slow and the issue may not always be at the table, it could have to do with the puck. When used, it’s normal for pucks to suffer regular wear and tear and develop minor imperfections. It is possible to fix this by using ultra-fine sanding papers to sand your puck until it’s incredibly smooth gently. In addition to the mallets, pucks also suffer wear and tear and may develop scratches. With the same fine sandpaper, lightly sand the inside of the mallets.
How to maintain an air hockey table
Above we discuss how to clean an air hockey table. Now we will share some tips on how to maintain the table. It is very important to maintain the hockey table. Because if you don’t do that you can’t play air hockey properly. So, if you want to make the air hockey table slide better you must have to keep clean your air hockey table.
Cover it up
No matter the size of the air hockey table you have at home, you must make sure you cover the game you haven’t played. The dust can penetrate those tiny gaps, and when it does, you’ll be able to let some air out, and the puck will not slide as easily.
Clean frequently
It would help if you cleaned the table regularly, following how quickly it collects dust and dirt. It is possible to do a general cleaning once every three months.
Checks equipment
Be aware of your play, and ensure that you do not put too excessive stress on the equipment you are using. If you spot nicks or scraps, it’s best to be smooth by using a bit of fine-grit sandpaper. You can also apply a gentle scratch, but don’t rub.
Proper cleaning
Cleaning your table is vital, and you must perform it appropriately; otherwise, you could scratch the top of your table. The first step is to use the vacuum cleaner Make use of isopropyl alcohol or window cleaners that contain no ammonia. Make sure to turn on the blower before you begin cleaning. Cleanse the table and allow it to dry.
Be cautious with drinks and food
Accidents do happen. However, they usually occur when food and beverages are placed near the table for air hockey. If you’re feeling thirsty or hungry during play, take a break and walk to a safe distance from your table before drinking or eating. Take care to clean any spills as soon as they occur. The tiny holes can be filled with dirt particles, and cleaning them was a failure. To clear the blocked hole, it is necessary to use a drill no more significant than 1/32 inch. After completing the drilling process, switch on the blower to blow the dirt out of the holes.
Things you don’t need to clean
Many people are hesitant to acknowledge this issue when cleaning their tables for air hockey. Move your puck towards the right and to the side of the ends; rails don’t wash that side of the rails at the end. Clean up the area, but not the area where the puck meets the rail. Beware of using substances such as silicone or wax. Yes, these items help the puck to slide smoothly. However, they also leave the puck with a lot of dust that will ruin your game as time passes. They can also block air holes that can eat up your time in the game by preventing the prankster from moving smoothly.
Conclusion
Initially cleaning an air hockey table could be a challenge, mainly if you’ve been playing at your table for a long time and have not cleaned it. Following our cleaning tips and staying on top of the maintenance of your table for air hockey can prolong the lifespan of the table’s life and keep it looking new. You might need to experiment with the cleaners you can employ or whether polishing can help enhance the performance of a hockey puck. If you maintain your equipment correctly, it is recommended that you only need to conduct a significant cleaning once-twice a year.
