How High is a Regulation Dartboard Hang | Informative Master Guide

Share

Read about how high is a regulation dartboard hang, and learn more about this sport. The game is played on an oversized board with twenty equal pieces. Additionally, the aim of the game is to score points by throwing darts. Each dart has the goal of being as close as is possible to the center of the board for a greater chance of winning points. There are numerous competitions around the world that test players’ skills. It is important to note that there are particular rules in which both the distance and dartboard height are considered. This gives the dartboard game a more serious aspect and a better basis for competition.

How high is a regulation dartboard hang?

How High is a Regulation Dartboard Hang

Height 

The lens must be 68 inches from the surface in the ground. Position it in two ways, from the center or the highest point of the board. If it’s hanging in the center, it makes a fantastic dartboard measurement. If it is turning it from the top, ensure that you measure it accordingly.

Distance

The distance between the line of throw and goal is contingent on the dart tip that you select to hang regulation dartboard. If you’re making use of steel tips, think about the distance between the board (take into consideration the length of the dartboard away from walls, and not only that wall) from the throwing line to 2.13 the 23.5 centimeters (7.9 quarter inches). If they are soft tip darts, which you’re using, their distance between the target’s face from the wall to the throw line measures 8 inches (20.32 cm).

The throw line 

Throw lines are what you are that is behind. This signifies that the dart thrower must be behind it at all times in a game. It must be at least three inches wide and directly ahead on the side of the game board. You can put it in place with the tape, and the thrower should not be any closer to the goal than the edge.

Wall protection 

When you are going to hang a regulation dartboard The most important thing to do is protect the wall on which the lens is. In general, if you’re playing with steel-tipped darts, you could utilize a protective shield like cork or place the darts in cabinets to guard the wall. A recommended playing space is about six feet long, and the target is located in its middle. We also suggest that you ensure no broken objects within 2 or 3 feet to both sides of the targets since darts could bounce off if they don’t touch the board correctly.

Read more: How to fix dart holes

Floor protection 

The area in which you play is crucial for both the ground and the dart. This is why we suggest using Dart mats. This is to safeguard the flooring. Floors that are more difficult to maintain, such as stone, concrete, and tiles, may cause damage or flatten of Dart tipping. Darts with steel tips can damage flooring materials like vinyl and wood. To safeguard them, you can apply the wear pattern. Place it on both sides of your board. Do this if you are a regular player.

How to hang a dartboard

Like hanging frames of photos and artwork, The best method for hanging a dartboard will depend on the wall’s design and the accessories already connected on the rear of the board. Certain dartboards have specially designed hanging discs and brackets, which makes turning the dartboard easier. So far we discuss how high is a regulation dartboard hang. Let’s discuss how to hang a dartboard now.

Learn more: How to build dartboard backboard

Dartboard height and distance regulations 

No matter what the wall’s material will be, you’ll require enough space for headroom and floor to make a safe dating space. The standard height of dartboards is at least 68 inches from the bottom to the middle of the bullseye. To determine the correct placement on the throwing line, select the size of the dartboard, then take the distance of 93 1/4 inches from the wall and down the floor. Add the thickness of the dartboard, then tape a piece of masking tape on the wall to mark the front of the line. The actual location might need to be adjusted a bit once the dartboard is in the wall to accommodate the hardware size that hangs it.

Checkout: How far do you stand from dart board

Picking a suitable location 

Before you get the other tools, Make sure you’ve picked an appropriate spot for the dartboard. There shouldn’t be any obstructions from the line of throwing to the wall. This area should not be situated in the middle of a room or any other space where people could pass without knowing that a dart match is taking place. The wall should also have at the very least a few feet of space on each side, free of windows, cabinets, electrical boxes, or any other items that could be damaged by darts that are errant. Make sure that there is at minimum two feet of space between the throw line and the wall so that players have enough space to focus and throw their darts. Ideally, the area for darting of the room must be five feet wide with a length of 11 feet.

Prepping the dartboard for hanging 

The majority of dartboards and cabinets are equipped with two hanger systems that are easy to use. One hangs with a wire and is fixed on the wall using screws. Another type is a bracket and flange system that allows you to move the cabinet or the board onto the wall. A dartboard is mounted in the cabinet with similar hardware.

The dartboard and cabinet have instructions on using the included mounting hardware that may differ based on the brand. A few dartboards come with a hanging loop already attached to their top designed to go over a nail or screw placed in the wall. If you are using this kind of hanger, you must first connect the three bumpers usually attached to the dartboard to the back of the dartboard by using screws.

Then, arrange them in a triangle arrangement near the outer borders of the board. To hang the latest style flange, simply attach the disc-shaped flange to the inside of the dartboard’s back. Insert screws into the hole in the middle first, and then the holes in the perimeter. Fix the bracket part to the wall. The position of the bracket will depend on the amount you’ll require; generally, the dartboard will have one and four for cabinets. You might like this guide on how to make a dartboard cabinet.

Hanging on drywall 

If you want to hang a dartboard over drywall, you should attach the dartboard to the wall with a stud. The stud can provide enough space to support the weight of the dartboard. A dartboard could weigh more than 10 pounds enough to tear the mounting screws from the drywall if it is suspended from drywall with no wall anchors. Find a stud within the area of play you are interested in by using a stud locater. Take a measurement of the wall around the stud about 68 inches to the level. Then mark the spot, as it is the place where the lower cup of the bracket’s mounting area is.

Place the bracket in this position, with the open side upwards, so the dartboard can move into the frame. Mark with a pencil the locations for pilot holes by using the holes of the bracket. Unhook the bracket and drill pilot holes that are shallow at the points previously drawn. Choose a bit smaller than the screws within the set of frames. Reposition the rack so that the holes on the bracket are aligned with the holes of the wall. Incorporate into the wall and secure the screws supplied in this mounting bracket.

Using wall wnchors and toggle bolts 

If you’re not able for the dartboard to be hung on a stud, consider using the wall anchors that are heavy-duty and toggle bolts in place. Plastic or hollow metal wall anchors are perfect for use in drywall. Utilize torque bolts. For plaster walls, it is essential to use toggle bolts to ensure a good hold. In any case, make sure that the anchors and bolts design to support much more weight than that your dartboard. Use one toggle bolt or anchor to each hole required for mounting the bracket to the wall. If hanging a cabinet for a dartboard using one anchor, place it near each corner. The cabinet must already have holes for mounting in the right places.

Mounting on brick or concrete block 

The dartboard being affixed directly to concrete or brick walls is not recommended, particularly for darts with a steel tip. Whichever kind of darts you use, the information can suffer severe damage if they hit the stone-like surface instead of the dartboard. If a block or brick wall is your only option, then mount an edging of plywood to the wall, a few feet larger and broader than the dartboard, ensuring that you can ensure that the middle of your piece is at the correct darting height. It is possible to paint the dartboard to complement the decor of your room or paint it in a neutral shade before affixing the dartboard onto the plywood.

To put this plywood backing board onto the wall:

  1. Ask assistance from a person you trust and plan out the best spot on the wall using painter’s adhesive to mark the edges and the perimeter of the panel.
  2. Drill pilot holes every one or two feet across the top, side, and the base of the piece through the board’s surface, not into its edges.
  3. Place the board against the wall once more and draw a line using these pilot holes. If this isn’t easy, then use an awl scratch the wall.

The board should be removed. Make pilot holes in the marks using a masonry tool with a carbide tip.

Make sure you use the size of the bit recommended in the box of concrete screws. Place the board on the wall. Place one concrete screw in each hole. Then make sure the screw is tightened using an appropriate screwdriver. The dartboard is now positioned against the plywood backer board as per the directions previously mentioned. For this, wall anchors that are simply connected to the plywood backer generally suffice.

Conclusion

If you’re an experienced dartboard player, it is essential to understand a standard dartboard hang height. After reading this guide, you’re fully aware of how high is regulation dartboard hang is. If you have anything to share with us, leave a comment below.

Leave a Reply

Your email address will not be published. Required fields are marked *

seventeen − eleven =

x