How Deep is Kitchen Sink | In-depth Researched Guide form Experts

Do you have any idea about how deep is kitchen sink? The sink is among the most crucial areas within the kitchen. It is estimated that we spend two-thirds of our time in the kitchen sink, doing chores in the kitchen: washing vegetables, pouring pasta water into the pan, and washing hands fast. The kitchen mixer and sink are the water supply and the center for cleaning within the kitchen. In this article, you will learn how deep is kitchen sink can be, and other crucial topics are addressed.

How deep is kitchen sink

If you buy a sink for your kitchen area, the primary thing to consider is the dimensions. You must know how deep is the kitchen sink. It’s all about whether it can fit into the designated space, how it appears on the inside, and whether it hinders the work. The dimensions of the kitchen sink will vary based on its shape. For square products, they measure 500 by 500 mm; however, there are different options. Kitchen sink depths typically are in the range of 7 inches to 12 inches. However, the ideal range is between 8 and 10 inches. Above or below this threshold may not be suitable for all people. Size of the cabinet, your habits at home even your height could affect the degree of discomfort you feel.

Read more: How to install drop in sink on granite countertop 

What is the depth of the bowl

After determining the length and transverse dimensions, pay attention to the dimensions that the sink is. The comfort of the sink’s use is contingent on this feature. The ideal center size is 16-19cm. This can refer to as the standard size as these sinks are the most commonly manufactured. However, there are also a few unique circumstances. Sometimes, there’s not enough space available in the room, or you need to purchase an extra sink for your family or use it as a washbasin. In this situation, it is a deviation from norms.

How to measure the size of a sink

When you can measure the size of a kitchen sink, you will know how deep the kitchen sink is. If the sink is set on a curbstone, it is essential to construct around the curbstone’s dimensions. So, it is important to measure two dimensions. Find the dimensions of the cabinet’s width or length, including the dimensions of the wings to place cutting boards, dishes, and the other cooking utensils. It is preferential for those who are right-handed to have a wing-stand located on the right side while left-handers can have it on their left. When choosing the sink’s size, take note that the sink does not touch the walls once you install it.

The optimal spacing between the walls and where the kitchen sink will be 5 centimeters. It is possible to leave more space to store the detergent. On the front, the sink should not run through the cabinet’s edges as otherwise, the clothes could get splattered while washing dishes. The overhead sink should choose with care under the cabinet’s dimensions. It recommends sketching a plan of the position of the sink before buying it and indicating the dimensions. After that, when you choose the size you want, it is nearly impossible to miss a decision.

Learn more: How to reglaze kitchen sink

What is the standard size for the kitchen sink

A high-quality sink can last for 15 or more years. However, even the top sinks can damage by scratches and wear due to frequent usage. When the time comes for you to change your faucet, choose a sink based on size before considering the price, finish, and other options. When you know the standard sizes available in kitchen sinks, you can make it easier to plan your kitchen’s layout, make cabinets, design cabinets, and choose the perfect sink to meet your requirements.

Setting the standard

The typical kitchen sink is 22 by 30 inches. Although the dimensions from front to back of the sink are the same because of the size of the majority of cabinets and countertops, the width of various kinds of sinks can differ drastically. Some homeowners choose more concrete countertops of thirty inches and more. This will be able to accommodate a bigger sink than the conventional countertop. Single bowl sinks are available in widths as large as 33 inches, whereas double-bowl sinks span 48 inches. Triple bowls may be as large as 60 inches. Trough sinks that are narrow and designed to make food preparation easier typically measure 8 to 14 inches from front to back and extend 50 inches or more.

Going deep

The majority of kitchen sinks range from eight to 10 inches deep. While a sink with 10 inches of depth can use to wash pans, pots, and pans, sinks with a deeper depth can be uncomfortable for smaller family members to utilize. Shallow sinks allow for better reaching and work. Some prep sinks have only a couple of inches and are typically installed next to an ordinary sink to wash dishes or clean vegetables. When selecting the depth of your sink, be aware that sinks with undercounts are about 2 inches higher than drop-in sinks making the sink’s bottom harder to reach.

In proportion

The standard 22-by-33-inch sink could be too big for tiny kitchens. For spaces that are smaller than 150 square feet or 10 by 15 feet, stay clear of the larger sinks and opt for models in the range of standard sizes. If your kitchen is larger than 150 sq. ft., search for larger cabinets, which include triple or double bowl units that can better accommodate the requirements of families with larger households.

Finding the perfect for you

One of the most important requirements to select the kitchen sink’s size is finding an appropriate size for the cabinets in the kitchen’s base. Most cabinets are 24 inches deep and from 36-42 inches in height and between 25-1/4 and 26 inches wide. The typical 22-by-33-inch sink will fit in the dimensions. If your cabinets’ base is more than the standard size, you might be able to fit the larger size sink. Find the depth, height, and width of the cabinets by subtracting two to three inches from each measurement to determine the proper size sink to fit the cabinets you have.

How to choose the correct deep kitchen sink 

Kitchen sinks are increasing in depth. The majority of sinks were just 6 inches deep or less. Today, the average is between 8 and 10 inches, and some are up to 12 inches deep. If you decide to repurpose an antique sink, like the one shown above, remember that it’s probably at the bottom. If you’re purchasing a brand new, there are several different options regarding the depth of the bowl.

Check out: How to clean a composite granite sink franke

When to go shallow

 For instance, a shallow bowl -as in, under 8 inches is the most comfortable bowl for people with a height of 5 4 inches or smaller or very tall (6 feet or more, or 2 inches taller). A shallower bowl can allow a person with a shorter height to work in the sink without leaning over to wash things in the bottom. Taller people can work in the sink with less space without kneeling down or leaning over. The shallow sinks require smaller space inside the cabinet underneath them. In addition to freeing up space for storage, they also make it simpler to install and use the garbage disposal and the plumbing fittings. Shallow sinks typically be a little less expensive than the more expensive versions. They are ideal for people who wash smaller items in the kitchen and sit or lean down on a deep sink for extended periods.

When to go deep

 If you’re like me, get every dish dirty at home when preparing an entire meal, a deep sink is perfect. There is plenty of room to prepare meals, and if you need to, you can store the dirty dishes until you’re able to clean them. It’s also a great sink for bakers or anyone else who regularly wash huge sheet pans or cutting boards. A sink’s at least 10 inches gives you the space you require to wash dishes that are larger without splashing water over the countertops and the floor. Remember that you’ll gain the extra depth of the countertop’s thickness if you go using the Undercount Sink. However, it is possible to offset this with an elevated sink grid like the one shown in this.

Get and deep as well as shallow

If space and budget permit it, you can install two sinks that have different bowl sizes. A deeper, larger sink is ideal for hand washing large objects. A smaller sink is a more ergonomic choice for people who find a deep sink difficult to use for prolonged periods.

Countertop height

You can make a larger kitchen sink easier for smaller users — or even accessible for people in wheelchairs by lowering the countertop placed on by just a few inches lower than the 36-inch standard height. To make it accessible to wheelchair users, ensure that you have enough space under the cabinet. In the same way, you can increase the counter’s height to create a more comfortable sink for taller ones. Be aware of the domino effect caused by increasing or lowering the height of countertops, like accommodating appliances, and its impact on the future value of resales.

Conclusion

Don’t let a poorly sized kitchen sink get in the way of your and healthy and clean living space. We hope you learn how deep the kitchen sink is and can clear your mind when choosing the proper kitchen sink depth. Best of luck when selecting the right sink!