Dartboard Bulging: Information You Must Explore Once

Share

dartboard bulging! Do you know wht it is? There are a variety of opinions regarding dartboards and darts due to the rapid rise in popularity throughout the years. It has also resulted in exponential growth and product design and manufacturing improvement. I’ve played darts since the 90s, and the game has changed completely over the past 20 years. So, the advice you read today for maintenance of your dartboard and buying guidebooks are only sometimes appropriate. One thing you could encounter and get different solutions to is why is your dartboard expanding. Dartboards can bulge or expand due to a variety of causes. The first reason is the general use and tear. If you continue to practice, even the top boards can eventually see bristles damaged and may break or fall out.

Another reason could be that the dartboard is too wet, too dry, or not rotated regularly. Modern dartboards require specific chores to complete. To ensure the health of the board’s integrity and ensure the longest life from the board that you can. In this post, I’ll explain why dartboards expand and bulge, how to prevent them, and whether you can correct them.

What is an oversized dartboard?

A bulging (also often referred to as the swelling) dartboard is quite easy to understand. It happens when certain dartboard parts begin to appear as bumps/lumps. They look like they’re growing or bulging. These bumps usually appear visible and develop around numbers that you often throw.

The most frequent areas in which a dartboard becomes swollen are the bullseye area, treble 20, and Treble 19. These are the areas players typically throw them often. While it’s not the reason for a board bulging, they are a contributing factor. It’s generally the areas in these regions where you’ll see bulges. Before we understand why dartboards are bulging, we must know how these contemporary boards construct. A bristle dartboard will typically construct from sisal fiber that is strong, compacted, and self-healing. Learn more about how to make a dartboard.

This means that when your dart hits the dartboard, it will not suffer as much damage as a board made of paper. It will also have the possibility of returning to its original shape after the dart takes off. Be sure to not put darts on the board even when you’re away from the board. The dartboards may effective for self-healing in the short term. But as time passes, they’ll get older and show wear and tear. Be aware of this whenever you notice the dartboard is bulging.

Why is your dartboard inflating

A bulging dartboard is a serious problem. In most cases, it means that the dartboard will no longer be functional. The first one I had was one I bought second-hand from a friend. I still remember how the dartboard was full that you could barely see the Treble.

Did it bother me at all? No.

I was watching BDO in addition to the PDC tournaments. Since they played with the Treble 20, I did too. Additionally, I played with the board to make it manageable. However, as I improved, the treble 19 grew larger, and the board became functional. Remember that when you begin to be semi-decent playing darts, it is important to play on a quality board.

There are two primary reasons your dartboard is likely to be bursting:

Environment & Atmosphere

Because bristle boards are made of sisal fibers, these fibers are extremely prone to the air. It may sound extreme, but sisal fiber boards don’t respond well to moisture, humidity, or dampness.

If a sisal board is wet, there’s the risk of the sisal fibers expanding and separating from the adhesive that keeps them in position. I’m not saying that they aren’t, but they’re well-designed and designed. However, if stored near water, it is likely to be prone to the risk of them swelling.

Your dartboard must keep away from windows that are open and direct sunlight, radiators, hot lamp fires, or water source in the real sense. Setting your dartboard in a different place could decrease your board’s life.

Age

If you are a regular player (daily or at least every week, a couple of times), you will wear out your board. This will be among the main factors in developing swelling and bulging on your board.

Although the sisal fibers on your board have an excellent capacity for recovery, they will only be able to damage to a certain extent before they can recover. If you’re an experienced player who regularly practices, it recommends that you turn your board before every session to get the same wear from it.

This issue is unavoidable, but a board bulging due to wear and tear is unlikely to occur as long as you own a good-quality board.

What can you do can you stop your dartboard from bulging

Several reasons could cause the dartboard to expand and bulge. There are also some ways you can act to prevent (or lessen the likelihood) this occurring to you.

  • Environment for playing – Don’t place your dartboard in a location that could let humidity, water, or humid air easily get into it. Ideally, you’ll want to keep it away from the conditions. That means that when you’re not playing, put your board in a cabinet or in a dry and cool place if you don’t wall mount it.
  • Rotate your board regularly – If you continue hitting the same area of the board day after day, practicing time after practice, your dartboard will begin to swell quickly. Most likely, it will be between the higher trebles 20 and 19. To reduce this chance, ensure that you turn your board weekly or every couple of days.
  • Washing – Avoid washing your dartboard. It may seem like the best way to avoid drying or damage to the fibers, but wetness on your dartboard can increase the size of the fibers and weaken the bond they have with the glue that holds them in the position.

These steps can help lower the chance of your dartboard expanding and becoming inaccessible. However, as I’ve already mentioned, wear and tear on the surface of your dartboard will occur. As time passes, your dartboard will likely suffer irreparable damage because of regular use.

Another thing I should have mentioned within this piece is the dartboard’s quality since a high-quality board is more robust to bulge and generally last longer than a less expensive and poorly made board. Winmau is the brand that makes the top dartboards that are available. I personally own the Winmau Pro-SFB dartboard. Although it’s beginning to show signs of wear, it’s still going strong after two years of non-stop usage. If you’re looking for the best board, you can purchase the Winmau blade 5 on Amazon because it’s the most talked about board available for a reason!

The myth of the watering

Lastly, as I spoke about washing and watering your dartboard earlier, I’d like to clarify the comment I mentioned at the beginning of the piece about contradicting information nowadays. In the past, dartboards could be kept overnight in a soaker using wooden boards made of Elmwood. I currently have a Manchester Log-end Dartboard (the first dart league I ever played on this dartboard) made of solid Elm wood board. After being used, the dartboard should be allowed to soak so that the wood expands and fills the holes.

It should also soak to stop it from drying, cracking, and breaking. Bristle boards are distinct and shouldn’t keep dry, and as technology for dartboards develops, it is essential to stay up-to-date with maintenance tips as mistakes can be made, such as seeing anyone recommend that you soak the board with bristles!

Conclusion

If your dartboard shows signs of swelling and bulging, likely, the damage already accomplishes, and you will not capable of reversing it. The best thing to do in this situation is to figure out what caused the swelling and then perform more frequent or targeted maintenance on your new dartboard to prevent the same thing from happening.

One of the most important lessons is don’t let your dartboard get wet, either from washing or being in a humid or humid place. Be sure to rotate your board frequently to protect it from injuries from the frequent impact of darts, and lastly, purchase an excellent sisal dartboard from a reliable manufacturer.

Leave a Reply

Your email address will not be published. Required fields are marked *

nineteen + 5 =

x